Area Calculator
Choose a shape, enter its dimensions in feet, inches, yards, meters, centimeters or millimeters, and the calculator returns the area in square feet, square yards, square meters, acres and hectares together. For a triangle given three sides it applies Heron's formula and rejects lengths that cannot close, so a mistyped side is caught before you rely on it.
See also: turn lot dimensions into acres
Checked Rules used
How the area calculator works
Result
How it was calculated
Fill in the fields above to see the result and every step here.
Worked example: a rectangle
A rectangle 20 feet by 15 feet covers 300 square feet. That is 33.333 square yards, 27.8709 square meters or 0.0069 acres.
The formula for each shape
Pick the shape, choose the unit you measured in and enter every size in that unit. The calculator finds the area with the shape's formula, in your unit squared, then converts it with exact factors: one square foot is 0.09290304 square meters and one acre is 43,560 square feet. You get square feet, square yards, square meters, acres and hectares together.
The shapes are flat with straight sides or exact curves. For an irregular outline, split it into simple shapes, find each area and add them. Local land units such as bigha or katha are not converted, because they vary from place to place.
- Rectangle: length × width.
- Triangle from base and height: ½ × base × height.
- Triangle from three sides: Heron's formula. Half the perimeter is s = (a + b + c) ÷ 2 and the area is √(s × (s − a) × (s − b) × (s − c)). The three sides must make a triangle, so any two together must be longer than the third.
- Circle: π ÷ 4 × diameter².
- Ellipse: π ÷ 4 × full long axis × full short axis.
- Trapezoid: ½ × (first parallel side + second parallel side) × height.
- Parallelogram: base × height.
- Sector: angle ÷ 360 × π × radius².
- Ring: π ÷ 4 × (outer diameter² − inner diameter²).
- Regular polygon: number of sides × side² ÷ (4 × tan(180° ÷ number of sides)).
Enter full axes and diameters, not half of them, except the radius of a sector.
The steps of the worked example appear here.
Method and sources
A rectangle is length times width, a triangle is half the base times the height, a circle is a quarter of pi times diameter squared, an ellipse is a quarter of pi times the full major and minor axes, a trapezoid is half the sum of the parallel sides times the height, and a sector is its angle as a share of three hundred sixty degrees of the full circle. A triangle from three sides uses Heron's formula and is rejected when two sides add up to no more than the third. Results convert with exact factors: one acre is 43,560 square feet and one square foot is 0.0929 square meters.
What this calculator does not cover
- Plane shapes with straight or exact curved edges only; an irregular outline should be split into simple shapes and added.
- Regional land units such as bigha or katha vary from place to place, so this page does not convert them. Use square feet, square yards, square meters, acres or hectares.
Figures and calculation checked on Oct 10, 2026.
Area calculator FAQ
How do you find the area of a triangle?
With a base and a height, the area is half the base times the height. With three sides, choose the three-sides option: the calculator uses Heron's formula and tells you if the sides cannot form a triangle. A triangle with sides three, four and five feet has an area of 6 square feet.
How do you calculate land area?
Split the plot into rectangles and triangles, find each area in square feet and add them. One acre is 43,560 square feet, so divide the total by that figure to get acres. A rectangle of 20 by 15 feet is 300 square feet.
Related tools
Find the volume of a box, cylinder, sphere, cone, pyramid or pipe wall and read it in cubic feet, cubic yards, liters and gallons, with the formula shown.
Count tiles for a floor areaCount the tiles for a floor from room size, tile size and grout joint, add a waste percentage you can change, and round up to whole boxes.
Results are estimates for planning. Check quantities with your supplier, and local building codes or a qualified professional for anything structural.