Flooring Calculator
Enter the room length and width, choose a straight or diagonal layout and the square feet in one box, and the calculator returns the area to order including waste, the number of whole boxes and the square feet in those boxes. Switch to plank mode for the number of planks, and add a price per square foot for a cost.
See also: measure several rooms and cut-outs
Checked Rules used
Method note: common trade practice, not an official standard. Check the figure with your supplier.
How the flooring calculator works
Result
How it was calculated
Fill in the fields above to see the result and every step here.
- Checked Source: Unit Conversion, Special Publication 811, Guide for the Use of the International System of Units, Handbook 44 (2026) Appendix C, General Tables of Units of Measurement, SP 811 Appendix B.8, Factors for units listed alphabetically, U.S. Survey Foot
-
Checked
Source: How much extra tile to buy, How much overage for tile, Roofing Calculator: Squares, Bundles, Underlayment, ProSeries LVF installation and care guide, TDS 400 LATICRETE Grout Guide, TEK 04-02A Estimating Concrete Masonry Materials
Method note: common trade practice, not an official standard. Check the figure with your supplier.
Worked example: boxes for a room
A room 15 feet by 12 feet is 180 square feet. A straight layout adds 10 percent waste, so you order 198 square feet. With 20 square feet in each box that is 10 boxes, which is 200 square feet in full boxes.
Straight and diagonal waste
A straight layout commonly uses 10 percent extra, and a diagonal layout 15 percent, because diagonal cuts at every wall leave more offcuts. Flooring makers publish a figure like this in their installation guides. The percentages here are trade practice, not a rule, so you can enter your own.
Rooms with many corners, closets or patterned flooring can need more. Check the box label and ask your installer before you order.
How the boxes and planks are counted
Multiply the room length by the width for the floor area, then add waste for cuts at the walls and boards you cannot use. Divide that area to order by the square feet in one box and round up, because you cannot buy part of a box. For planks, the calculator divides the area to order by the area of one plank instead, and rounds up the same way.
The price is worked on whole boxes, since that is what you pay for, so the cost can be a little higher than the area you need times the price. The extra square feet in the last box are shown as left over.
The steps of the worked example appear here.
Method and sources
Net area is room length times width. Waste is added as a percentage, 10 percent for a straight layout and 15 percent for a diagonal one by default, in line with a tile manufacturer's installation guide for diagonal work. Order area is net area times one plus the waste, and boxes are the order area divided by the coverage per box, rounded up. Planks are the order area in square inches divided by the area of one plank, rounded up. Cost is the full boxes times their coverage times the price per square foot. Metric entries convert at 0.0929 square meters per square foot.
What this calculator does not cover
- Waste percentages are common trade practice; adjust them to your project.
- Rectangular rooms only; subtract closets or add nooks by running the tool for each area. Subfloor, underlayment and transitions are not counted.
- The waste defaults are provisional, so check the box label and ask your installer.
Figures and calculation checked on Oct 11, 2026.
Flooring calculator FAQ
How many boxes of flooring do I need?
Divide the area to order by the square feet in one box and round up to whole boxes. For a room 15 by 12 feet at 10 percent waste you order 198 square feet, which is 10 boxes of 20 square feet.
How many boxes of laminate flooring do I need?
The method is the same for laminate: enter the coverage printed on the box and choose the layout. A diagonal layout of the same room adds 15 percent waste, so you order 207 square feet and need 11 boxes.
How much flooring do I need?
Multiply the length by the width for the floor area, then add waste. In plank mode a room 12 by 10 feet with 5 inch by 48 inch planks needs 132 square feet including waste, which is 80 planks.
How do you measure for flooring?
Measure the length and width of the room at its longest points, in feet. For a room with a closet or a nook, measure each rectangle separately and run the calculator for each, then add the results. Underlayment and doorway transitions are not counted.
Related tools
Find the area of a rectangle, triangle, circle, ellipse, trapezoid, sector or polygon and read it in square feet, square yards, square meters and acres.
Count tiles instead of boxes of planksCount the tiles for a floor from room size, tile size and grout joint, add a waste percentage you can change, and round up to whole boxes.
Results are estimates for planning. Check quantities with your supplier, and local building codes or a qualified professional for anything structural.