Tile Calculator
Enter the room length and width, subtract doors or built-ins, add the tile size and grout joint, choose a waste percentage and the number of tiles in a box. The calculator returns the exact tile count, the tiles to buy after waste and the whole boxes to order, with the waste percentage shown so you can change it.
See also: measure several rooms first
Checked Rules used
Method note: common trade practice, not an official standard. Check the figure with your supplier.
How the tile calculator works
Result
How it was calculated
Fill in the fields above to see the result and every step here.
- Checked Source: Unit Conversion, Special Publication 811, Guide for the Use of the International System of Units, Handbook 44 (2026) Appendix C, General Tables of Units of Measurement, SP 811 Appendix B.8, Factors for units listed alphabetically, U.S. Survey Foot
-
Checked
Source: How much extra tile to buy, How much overage for tile, Roofing Calculator: Squares, Bundles, Underlayment, ProSeries LVF installation and care guide, TDS 400 LATICRETE Grout Guide, TEK 04-02A Estimating Concrete Masonry Materials
Method note: common trade practice, not an official standard. Check the figure with your supplier.
Worked example: a floor in boxes
A room 10 feet by 10 feet is 100 square feet. Tiled with 12 by 24 inch tiles, a 0.125 inch grout joint and 15 percent waste, it needs 49.23 tiles exactly and 57 tiles to buy. At 8 tiles per box that is 8 boxes, covering 115 square feet with waste.
Why waste matters
From floor area to tiles
Measure the floor, then take away anything you will not tile. Each tile covers its own size plus one grout joint, so the calculator divides the floor area by that footprint to get the number of tiles with no waste. It then adds your waste percentage and rounds up, because you cannot buy part of a tile. If you give the tiles in one box, it also rounds up to whole boxes.
The steps of the worked example appear here.
How much extra to buy
Tiles get cut at walls and around fixtures, and some break. A straight layout commonly uses 10 percent extra, and a diagonal or complex layout 15 percent. These are trade habits, not a tile standard, so the percentage is a field you can change. Ask your supplier too: a patterned or large-format tile often needs more.
Buy the whole job in one go if you can. Tiles from different production lots can differ slightly in shade, and a later box may not match.
Method and sources
Net area is room length times width minus openings. Each tile covers its length plus the joint times its width plus the joint, so the exact count is the net area divided by that footprint. Waste is added as a percentage, the tile count is rounded up, and boxes are the tiles to buy divided by tiles per box, rounded up. Common waste is 10 percent for a straight layout and 15 percent for a diagonal or complex layout. These are common trade practice and provisional defaults you can change. Metric entries convert at 0.0254 meters per inch.
What this calculator does not cover
- Waste percentages are common trade practice; adjust them to your project.
- Area-based count; real cuts, pattern repeats and shade lots can need more.
- The waste defaults are provisional and are not taken from any tile standard, so check them with your tile supplier.
Figures and calculation checked on Oct 11, 2026.
Tile calculator FAQ
How much tile do I need?
Find the floor area, take away doors and built-ins, divide by the area of one tile including its grout joint, then add waste and round up. A room 10 by 10 feet needs 57 tiles to buy at 15 percent waste.
How many square feet of tile do I need?
Multiply the room length by the width in feet and subtract openings, then add waste. A room of 100 square feet needs 115 square feet of tile with 15 percent waste. Straight layouts commonly use 10 percent and diagonal layouts 15 percent.
Next steps: grout and flooring
Find the area of a rectangle, triangle, circle, ellipse, trapezoid, sector or polygon and read it in square feet, square yards, square meters and acres.
Boxes of plank or laminate flooringTurn room size into the flooring to order: square feet with waste, whole boxes or planks, and a cost, for straight or diagonal layouts, ready to print.
Results are estimates for planning. Check quantities with your supplier, and local building codes or a qualified professional for anything structural.