Grout Calculator
Enter the area, tile length, width and thickness, and the grout joint width. The calculator finds the volume of the joints, converts it to pounds or kilograms using a grout density you can change, adds waste and rounds up to whole bags of the size you choose. Treat it as a geometric estimate and check the manufacturer's coverage chart before you buy.
See also: count the tiles and boxes first
Checked Rules used
Method note: common trade practice, not an official standard. Check the figure with your supplier.
How the grout calculator works
Result
How it was calculated
Fill in the fields above to see the result and every step here.
-
Checked
Source: How to calculate your grout requirements, The power of the grout calculator, TDS 400 LATICRETE Grout Guide
Method note: common trade practice, not an official standard. Check the figure with your supplier.
- Checked Source: Unit Conversion, Special Publication 811, Guide for the Use of the International System of Units, Handbook 44 (2026) Appendix C, General Tables of Units of Measurement, SP 811 Appendix B.8, Factors for units listed alphabetically, U.S. Survey Foot
-
Checked
Source: How much extra tile to buy, How much overage for tile, Roofing Calculator: Squares, Bundles, Underlayment, ProSeries LVF installation and care guide, TDS 400 LATICRETE Grout Guide, TEK 04-02A Estimating Concrete Masonry Materials
Method note: common trade practice, not an official standard. Check the figure with your supplier.
Worked example: a floor of twelve inch tile
A floor of 100 square feet with 12 by 12 inch tiles, 0.375 inch thick and a 0.125 inch joint has joints holding 112.5 cubic inches of grout. That is 6.5 pounds, or 7.15 pounds with the default waste of 10 percent.
Method and sources
Each tile contributes its length plus its width, times the joint width, times the joint depth, and the number of tiles is the area divided by the area of one tile. That joint volume in cubic inches is turned into milliliters at 16.3871 milliliters per cubic inch and into weight with a density of 1.6 kilograms per liter, within a range of 1.4 to 1.6. Waste adds 10 percent by default, and bags are the weight with waste divided by the bag size, rounded up. A manufacturer data sheet describes about this much extra to allow for jobsite waste. Metric entries are converted with NIST factors.
What this calculator does not cover
- Waste percentages are common trade practice; adjust them to your project.
- Grout quantity is a geometric estimate; check the manufacturer's coverage chart.
- Real yield depends on the product, the joint finish and spillage. The density and waste defaults are provisional and you can change both.
Figures and calculation checked on Oct 11, 2026.
Grout calculator FAQ
How much grout do I need?
Work out the joint volume from the tile size, joint width and depth, convert it to weight with the grout density and add waste. 100 square feet of 12 inch tiles with a 0.125 inch joint needs 7.15 pounds of grout including waste.
How much grout per square meter?
Switch to metric and enter the tile size, thickness and joint width in millimeters. For 1 square meter of 300 mm tiles, 10 mm thick with a 4 mm joint, the joints take 0.427 kg of grout at a density of 1.6 kilograms per liter, before any waste.
Next steps and related tools
Add rooms in feet and inches, subtract cut-outs, and get total square feet, square yards, square meters, an order quantity with waste and a cost.
Find the area of a round or angled floorFind the area of a rectangle, triangle, circle, ellipse, trapezoid, sector or polygon and read it in square feet, square yards, square meters and acres.
Estimate paint, concrete or gravelEstimate concrete bags, gravel or mulch, and paint gallons to buy, with a visible waste percentage, rounded-up quantities and a printable shopping list.
Results are estimates for planning. Check quantities with your supplier, and local building codes or a qualified professional for anything structural.