Volume Calculator
Pick a shape, enter its dimensions in feet, inches, yards, meters, centimeters or millimeters, and the calculator returns the volume in cubic feet, cubic yards, cubic meters, liters and US gallons together. The formula used for your shape is shown beside the result, so you can check the working or read the figure in the unit your supplier sells by.
See also: work out the floor area first
Checked Rules used
How the volume calculator works
Result
How it was calculated
Fill in the fields above to see the result and every step here.
Worked example: a box form
A box form ten feet long, ten feet wide and four feet deep holds 400 cubic feet. That is 14.8148 cubic yards, 11.3267 cubic meters or 11,326.739 liters.
The formula for each shape
Pick the shape, choose the unit you measured in and enter every size in that same unit. The calculator finds the volume with the shape's formula, in your unit cubed, and then converts it with exact factors: 0.3048 meters per foot, 0.0254 per inch and 0.9144 per yard. From cubic meters it gives cubic feet, cubic yards, liters and US gallons together, so you can read the answer in the unit your supplier sells by.
The result is the exact volume of an ideal solid. Concrete, soil and gravel orders need extra for waste and slope, which this page does not add. Use the material calculator for a quantity to buy.
- Box: length × width × height.
- Cylinder: π ÷ 4 × diameter² × height.
- Sphere: π ÷ 6 × diameter³.
- Cone: π ÷ 12 × diameter² × height.
- Pyramid (rectangular base): length × width × height ÷ 3.
- Tube (hollow cylinder): π ÷ 4 × (outer diameter² − inner diameter²) × length.
Enter diameters, not radii. To find what a pipe holds, use the cylinder with the inside diameter; to find the material in the pipe wall, use the tube. One cubic yard is 27 cubic feet (0.764554858 cubic meters against 0.028316847 for a cubic foot), and one US gallon is 3.785411784 liters.
The steps of the worked example appear here.
Method and sources
Each shape uses its standard geometric formula. A box is length times width times height, a cylinder is a quarter of pi times diameter squared times height, a sphere is a sixth of pi times diameter cubed, a cone is a twelfth of pi times diameter squared times height and a pyramid is a third of length times width times height. A tube subtracts the inner cylinder from the outer one. Lengths convert to meters with exact factors: 0.0254 meters per inch, 0.3048 per foot and 0.9144 per yard. One US gallon is 3.7854 liters.
What this calculator does not cover
- Ideal solid shapes only; irregular and sloped volumes need a surveyor or a split into simpler shapes.
- The result is the exact geometric volume. A concrete, soil or gravel order needs a waste allowance that this page does not add, so use the material calculator for a quantity to buy.
Figures and calculation checked on Oct 10, 2026.
Volume calculator FAQ
What is the best pipe volume calculator?
For the space inside a pipe, choose the cylinder shape, enter the inner diameter and the pipe length, and read the liters or US gallons. The tube shape gives the volume of the pipe wall itself, which is what you want when you need the material in the pipe rather than what it holds. Both show the formula used.
How do you find the volume of a cylinder?
Choose the cylinder shape and enter the diameter and the height. The volume is a quarter of pi times the diameter squared times the height. A cylinder twelve inches across and twelve inches tall holds 0.7854 cubic feet, which is 22.24 liters.
How do you find volume with a calculator?
Pick the shape closest to what you are measuring, enter every dimension in the same unit and read the result. If the object is irregular, split it into simple shapes, find each volume and add them together.
Related tools
Add rooms in feet and inches, subtract cut-outs, and get total square feet, square yards, square meters, an order quantity with waste and a cost.
Swept volume of an engineFind engine displacement in cc, liters and cubic inches from bore, stroke and cylinders, or work back from a target displacement to the bore you need.
Results are estimates for planning. Check quantities with your supplier, and local building codes or a qualified professional for anything structural.