My Volume Calculator
What do you want to work out?

Engine Displacement Calculator

Enter the bore, the stroke and the number of cylinders in millimeters, centimeters or inches, and the calculator returns the engine displacement in cc, liters and cubic inches, the volume per cylinder and the bore to stroke ratio. A second mode works backward from a target displacement to the bore you need. This is engine swept volume, not displacement in physics.

Checked Rules used

How the engine displacement calculator works

The fields hold the worked example. Change any value and the result updates at once.

The width of one cylinder, for example 86 mm or 4 in.

How far the piston travels, for example 86 mm or 3.48 in.

A whole number from 1 to 16.

In cubic centimeters. 1,000 cc is 1 liter, and 16.387064 cc is 1 cubic inch.

Result

Fill in the fields above to see the result and every step here.

Worked example: an eight cylinder engine

An engine with 8 cylinders, a 4 inch bore and a 3.48 inch stroke has a displacement of 349.8 cubic inches, which is 5.73 liters or 5,733 cc. Each cylinder sweeps 716.6 cc, and the bore to stroke ratio is 1.149.

Working back to the bore

Say you know the size you want, the stroke and the number of cylinders, and you need the bore. Switch to the target-size mode. The calculator takes the swept volume of one cylinder (the total divided by the cylinders) and solves the same equation for the bore: the bore is the square root of four times that volume, divided by π times the stroke.

The steps of the worked example appear here.

The answer is shown in millimeters and in the unit you picked. A bore wider than the stroke is called oversquare, and a bore narrower than the stroke is called undersquare. This is swept volume only. Compression ratio, rods and pistons are not part of it, and engine makers round the marketed size, so the badge on an engine can differ a little from the exact figure.

Method and sources

The swept volume of one cylinder is a quarter of pi times the bore squared times the stroke, and the engine total is that times the number of cylinders. Volumes convert at 16.3871 milliliters per cubic inch, and one cc is one milliliter. The backward mode solves the same equation for the bore. Compression ratio, rods and pistons are not part of swept volume.

What this calculator does not cover

  • Swept volume only; compression ratio, rod and piston details are excluded.

Figures and calculation checked on Oct 10, 2026.

How we calculate · Official sources

Engine displacement FAQ

What is an engine displacement calculator?

Engine displacement is the total volume swept by the pistons as they travel from the bottom to the top of their stroke. This calculator finds it from the bore, the stroke and the number of cylinders. It is not the physics idea of displacement as a distance from a starting point.

How do you calculate engine displacement?

Take a quarter of pi times the bore squared times the stroke for one cylinder, then multiply by the number of cylinders. An engine with 4 cylinders, an 86 mm bore and an 86 mm stroke comes to 1,998.2 cc, or 2 liters.

How do you find the bore for a target displacement?

Switch to the backward mode and enter the target displacement, the stroke and the number of cylinders. For a target of 2,000 cc with a stroke of 86 mm and 4 cylinders, the bore comes to 86.04 mm.

Related tools

Results are estimates for planning. Check quantities with your supplier, and local building codes or a qualified professional for anything structural.