My Volume Calculator
What do you want to work out?

Horsepower Calculator

Choose a mode: torque and rpm, a unit conversion between hp, kW, PS and watts, or an estimate from vehicle weight and quarter-mile time or trap speed. The calculator returns horsepower, kilowatts and metric horsepower, shows the constants it uses, and labels any estimate from race times as rough.

See also: turn kilowatts into energy and cost

Checked Rules used

Method note: common trade practice, not an official standard. Check the figure with your supplier.

How the horsepower calculator works

The fields hold the worked example. Change any value and the result updates at once.

From the engine's spec sheet or a dyno sheet.

The rpm at that torque, 1 to 30,000.

The number of units you have.

Include the driver and the fuel. Between 500 and 20,000 lb.

The speed at the end of the quarter mile.

Elapsed time in seconds, 3 to 30.

At the engine, 10 to 5,000.

Two commonly used fits of the same idea. They differ a little.

Result

Fill in the fields above to see the result and every step here.

Worked example: torque and rpm

An engine making 400 lb-ft of torque at 6,000 rpm produces 457 hp. That is 340.8 kW or 463.3 PS, the metric horsepower.

Exact conversions and rough estimates

Two of the modes are exact. Horsepower from torque is physics: power is torque times engine speed, and in pound-feet and rpm the constant is 33,000 divided by 2π, about 5,252.113. Unit conversion uses NIST factors: one horsepower is 745.699872 watts and one metric horsepower (PS) is 735.49875 watts.

The steps of the worked example appear here.

The drag-strip modes are rough estimates. They use fitted formulas: trap speed is a constant times the cube root of horsepower over weight, and elapsed time uses a second constant. The Hale fit uses 234 and 5.825; the Fox fit uses 230 and 6.269. We could not trace these constants to a published original, so treat the results as a rough guide.

An estimate from elapsed time is weaker than one from trap speed, because traction, gearing and launch change the time without changing the power. Weight should include the driver and the fuel. Cars far faster than the data behind the fit are extrapolated. None of this is a dyno reading or a rating.

Method and sources

Horsepower from torque follows hp = torque_lbft * rpm / 5252.113. One mechanical horsepower is 745.6999 watts and one metric horsepower, PS, is 735.4988 watts, both from NIST conversion factors. The estimates from weight and quarter-mile time or trap speed use commonly used empirical formulas with fixed constants. They give a rough figure and are not a dyno reading or a rating.

What this calculator does not cover

  • Horsepower estimates from quarter-mile data are rough empirical approximations.
  • Estimates from empirical fits are not a dyno reading and not a rating.
  • The constants behind the quarter-mile estimates are not traced to a published original, so treat those results as a rough guide only.

Figures and calculation checked on Oct 11, 2026.

How we calculate · Official sources

Horsepower calculator FAQ

How much horsepower does my car have?

The rated power is on the manufacturer's specification. This calculator can work it out from torque and rpm, or roughly from weight and a quarter-mile time. A car weighing 3,000 pounds that runs the quarter mile in 13 seconds is estimated at 269.9 hp, a rough figure and not a dyno reading.

Related tools

Results are estimates for planning. Check quantities with your supplier, and local building codes or a qualified professional for anything structural.